Fun in the sand.

Hi All,

Sorry for more non MG stuff but still lots of fun. I have just spent a week in the dunes of Liwa helping Newtrix racing as Chief Mechanic (actually only mechanic) in the 2013 Abu Dhabi desert challenge for 1300 km of desert racing.

The car is a Nissan Patrol with a LS2 V8 corvette engine fitted and it runs in the FIA T1 modified category.

 We had our share of problems, lack of spares limited the amount of repairs that could be done so Ian had the struggle on.

My work base for the week.

Sheared bottom front shock mount.

Burning HT leads at the rate of one a day.

 Rear body mounts to the chassis cracked.

 But it was all worth it in the end.

Completed, everyday with zero penalties and finished 16th overall and 2nd placed GCC entry which was an amazing result.

Cheers,
Richard B.

Next . . . . . I have just ordered a new speedo from the states so I will be cutting my hands to ribbons under the dashboard.

Nuts and Bolts

Hi All,

One of the jobs that has been due for a long time is sorting out all my nuts and bolts. I have had a plastic sorting boxes for years but they have always laid on a shelf and not been as organised as I wanted. So a few sheets of plywood and a but of time with table saw and a router and sorted !.

So what is in them all.

Top shelf is for small assortment boxes :-

-          Circlips, Split pins, Rivet Nuts, ‘O’Rings, clevis pins, roll pins and springs.

Then in the boxes on the regular shelves one for each :-

-          Small screws and self tapping screws.

-          Large screws and raw plugs

-          Metric nuts and bolts M10 and bigger

-          Metric nuts and bolts M8 and smaller

-          Washers.

-          Imperial nuts and bolts.

-          Electrical bits, fuses, relays and heat shrink.

-          Electrical crimp terminals.

-          Hose clamps and air fittings.

-          Abrasive paper (in A4 folder).

-          Pop rivets and staples.

-          Plastic body clips.

-          Batteries.

These are the parts boxes I use. They are a bit flimsy but gluing in the orange removable dividers solved that problem.

The shelves are just screwed and glued into dado grooves I routed into the sides.

Castors to keep it mobile to take to the track.

An a lock, not that I don;t trust you but ......

Cheers,
Richard B.

Next . . . . . . . Not sure.

SVDP RACING, WINNER DUBAI 24 HOURS 2013, D1

Hi All,

 

As well the MGB I also help with the SVDP Racing team 120D.

 

We have just managed a stunning result. Winner of the Dubai 24 hours 2013, D1 class (37th overall out of a starting grid of 80).

 

Lots of hard work but a stunning result.

 

 

 

The drivers and car all ready before the off.

 

We had to do lots of work including an engine change during qualifying,  1 hour 45 minutes between pit in to pit out ! and  of course my tools came with me.

 

More photos etc will be avialible here :-

  http://svdp-racing.co.uk/